Before beginning the TP link RE700X Extender setup you should become somewhat familiar with your device. A Boost WiFi extender that is compatible with 802.11ac is the TP Link RE700X device. Its two powerful exterior antennas rapidly extend the wireless network’s range. In essence, it strengthened and extended the range of the signals from your router. It belongs to the RE700X extender family, which offers a signal coverage area of 1200 square feet.
TP Link RE700X Extender Setup | Manual method
The following is a list of the procedures to follow for TP Link RE700X setup:
- The first step is to connect the TP Link RE700X to the power outlet.
- At this point, watch for the green light to turn on.
- once there is a firm green light on the extender.
- Pick up your laptop or any other gadget with wifi capabilities.
- At this point, connect your device to the Tplink ext.
- When you are connected, launch any web browser.
- After inputting it,Enter tplinkrepeater.net.
- You are now on the TP Link RE700X extender setup page.
- Here you need to create an account for the setup.
- Follow the on screen directions to configure your TP Link repeater.
Contact our specialists via live chat or our toll-free lines if you’re still having difficulties configuring your RE700X using the WPS method.
TP Link RE700X WPS Setup
Follow the steps outlined in the following section for Tp Link RE700X Extender Setup using the WPS way.
- Plug your extender in and watch for the green light to come on.
- Place the extender in the same location as your router.
- When you push the WPS button on the side of the extender, the WPS light will begin to blink.
- After it blinks for 1-2 minutes, press the wps button on the router.
- A green salad light is currently blinking on your extender.
- The devices are successfully connected to your router and extender.
TP Link RE700X | factory reset
You can quickly and easily do a factory reset on your TP Link RE700X extender if you need to due to a problem or issue. Simply adhere to the directions listed below.
- Any computer or smartphone linked to the TP Link RE700X network should open a web browser.
- Put www.tplinkrepeater.net in the address bar of your browser.
- Click LOG IN after entering your email address and password.
- If the Menu option shows in the browser, choose it.
- From the list of Other Settings, pick Settings.
- Tap RESET to select it.
- The settings of your TP Link RE700X extender are now set to the factory defaults.
Firmware Update for TP Link RE700X
If your extender is not delivering the proper speed or it is behaving weirdly even after a successful TP Link RE700X extender setup, then you will have to update the firmware on your TP Link RE700X extender. To update the firmware on your repeater you must follow these instructions.
- Open any web browser you choose.
- In the website bar of the browser, type www.tplinkrepeater.net.
- Click LOG IN after entering your email address and password.
- If the browser does, select the menu item that does.
- then select Firmware Update option from the Settings menu.
- then press the CHECK ONLINE button.
- If you carefully read the instructions, the most recent firmware will download to your Wi-Fi enabled device.
- Tap BROWSE to select it.
- To install, choose the most recent firmware version.
- Tap it to select “UPLOAD.”
Contact our specialists via live chat or our toll-free lines if you’re still having difficulties updating your firmware.
TP Link RE700X Troubleshooting tips
The troubleshooting steps in the instructions below can be used if your TP Link RE700X range extender still occasionally has issues.
- Use the Username & Password Help option if you can’t remember your username or password.
- Type http:// www.tplinkrepeater.net into the address bar of your browser.
- If the TP Link RE700X settings is accurate but the device still cannot connect to the primary WiFi network, check to see if the Device Link light is on or if it can be red.
- Try placing the computer or smartphone close to the TP Link RE700X extender to see if it is off.
TP Link RE700X | typical problems
- It is not possible to connect to TP Link RE700X.
- The Tp-link extender is not opening.
- Unable to upgrade firmware
- Finding it difficult to reset my TP Link RE700X.
- TP Link RE700X has no internet access.
- The LEDs on my TpLink TP Link RE700X extender are flickering and won’t reset.
- My SSID cannot be changed.
- There is no way to modify theTP Link RE700 wifi coverage.
- The Tp-link genie application won’t launch.
Technical information about TP Link RE700X
- The ability to work with two bands.
- WPA, WPA2, and WEP are wireless security standards.
- The most productive method is cross-band technology.
- capable of functioning with any wireless router.
- Spot Finder technology for quick installation and ideal positioning.
- For connecting a smart TV or gaming console, there is a gigabit Ethernet connector.
- The beamforming technique directs the signals to the target.
If you have any query about TP Link RE700X then feel free to contact our professionals for free assistance. They are available 24*7 to help you.
